Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped working it could be due to a dead battery in the coin-cell unit, water damage, receiver module issues, or even a defective chip. These are all easy solutions and you'll be able to get your car back up to speed in a matter of minutes!
Car keys can also be damaged due to the fact that the blade on the key gets worn. You can easily fix this issue by visiting your local Car Key Man Auto Locksmith to get a new blade installed.
Battery
The key fob of your Peugeot 308 may die or become weak enough to not send a strong signal. The key fob could stop working and prevent you from locking or unlocking your doors, or even starting the engine. To fix this issue, you'll have to replace the battery inside your key fob.
You can buy a brand new battery at an auto parts shop, or at your local hardware store. When you purchase the battery, ensure that it's fresh and hasn't just been sitting on the shelf for too long. A brand new battery is more capacity and will transmit a stronger signal to your vehicle.
After replacing the battery If you have a new battery, try unlocking and locking the doors of your Peugeot using the key fob. If the doors won't open, the problem is likely to be in the receiver module of the car that can be reset by your local Peugeot dealer.
The chip inside the key fob may also be damaged. It's possible to harm your key fob if you drop it on the ground, or expose it to moisture. The rubber seals that shield the chip from moisture may become worn down over time especially if your key fob is exposed to water for long durations, like submerging it in the ocean at the beach. To avoid this from happening, it's essential to protect your key fob from moisture and never let it come into contact with water.
Water Damage
If your key fob is submerged, whether you dropped it into the pool or threw it into a puddle don't think that it's an accident. While the key fob comes with rubber seals which should shield it from water, long-term exposure to water may cause damage to its electronic chip. Since water is such an excellent conductor and conductor, any water that is able to get inside the key fob may create a series of short circuits that eventually destroy the chip. After taking the batteries out, clean the contacts with isopropyl, and then dry them completely before putting them back in.
Your Peugeot 308 may not start due to a dead battery. Jumper cables can be a great option to restart the engine in case you have an additional vehicle. If the battery is faulty, it must be replaced.
Another possibility is an ineffective receiver in the vehicle that could block the signal from the key fob. peugeot 308 key fob www.g28carkeys.co.uk could be due to a problem with the antenna or wiring or the key fob may be damaged. If you have the latest key fob, it could need to be programmed to your vehicle. If you are unable to solve the issue, contact a professional technician. A trained technician will be able to identify the issue quickly and resolve it in a timely manner.
Radio Interference
Interference can cause symptoms such as a key fob that isn't recognized or has a narrow range. This can be either radiated, or conducted, with the former resultant from power supply cables and speakers wiring that are too close to electrical components. In general, rerouting cables and moving them away from these components will fix the issue.
It's unlikely that someone is listening in on your key fob signals to steal your car, but it is possible that the signal has been drowned out by radio frequency interference. Fortunately, this is easy to repair.
If your key fobs that aren't recognized, try using a fresh battery. Make sure that the battery is of the correct size and type. Batteries that are not of the correct size can cause damage to your device.
These devices could interfere with the key signal if they use the same radio frequency. It is recommended to avoid using these devices with your key fob.
Pairing Issues
The remote keyless entry system has a receiver that receives radio frequency signals from the key fob. It is not possible to start your vehicle if this receiver isn't working even if the key fob is in good working order and can be reprogrammed. The issue can be caused by a range of reasons, such as the dead battery in the coin and water damage. The receiver could also be failing due to a software issue or internal damage in the key.
The coin battery in your Peugeot 308 keyfob has likely been drained. You can easily replace this with a brand new battery but it is important to select the correct battery for your key fob. Using an incorrect battery could cause more problems with the key fob, so it is recommended to use the original or a replacement that is identical in size, voltage and specification.
Your Peugeot 308 keyfob may not work if it is associated with another vehicle. It is possible that you have accidentally given your key fob away to a friend or the key was used to unlock other vehicles. This can be resolved by reprogramming your key fob with an OBDII scan. This tool will ask for details about your car such as its VIN or engine type. It is important that you enter the correct details.